Showing posts with label friends. Show all posts
Showing posts with label friends. Show all posts

2.26.2013

50/50 grind





6' long 1 1/2" x 3" rectangular tube flat rail. 2" sq. tube legs with 1/4" x 3" feet 15" wide. Holes pre-drilled in each plate suitable for anchoring to your favorite public sidewalk. Shown at 12" with other heights by request. Fashioned out of 11 ga. steel, this rail will withstand grind after grind after grind...

-125/raw steel
-165/powder coat finish

Stop in to Subsect Skate Shop and ask Kevin for one.
309 E Walnut St., Des Moines, IA 50309 (515) 276-4365

1.25.2012

Reunion



You can't keep in touch with everyone you ever meet in your life...just enjoy the times you do get to see them and don't regret having not seen them more in the past.

Cheers Eric!

7.01.2011

Welcome to Linweld!



One of the new FIIF stickers on the front door of Linweld here in Des Moines...Thanks guys!

Want a sticker or two of your own? Send your snail mail address to >>>> info AT factoriifab DOT com

Have a safe holiday weekend...

6.02.2011

Zart 1312 window adornments




These are the windows behind the bar placement at Zart1312 in Des Moines. We simply found various pieces of steel and stainless drop-off from the shop and started attaching them to the window trim. Galvanized, mild steel, oxidized, HVAC flashing all made the dance on this project. Not too bad looking...

All things considered, in a best case scenario, I'll be able to COMPLETELY pull out of 1312 Locust at the end of next week. After I get a few things tidied up on Maribeth's railing at Zart, I can haul my JoBox back to the shop.

Worst case? I never leave.......and end up tending bar at Americana with Pete and Chief.

4.14.2011

Marge's kitchen island



Here's the completed kitchen island for my friend, Maggie Senn. 1" mild steel sq. tube legs with 1/2" solid round bar for the shelving in a "statuary bronze" powder coat finish. The top is a 1" thick maple butcher's block with 3" wide trim pieces wrapped around its perimeter. 2" locking casters keep the island mobile, but stationary when desired. Hidden under the block is a 1 1/2" thick piece of granite, supplied by Marge's, er, I mean, Maggie's mother, Jennifer. The block is removable so the granite can be used for baking purposes.

Thanks for your patience, Maggie! I hope this piece is integral in helping you prepare many, many fine dinners. Don't forget to KEEP THE WOOD OILED! Oh, and NEVER cut directly on the granite - you might as well bang your knives on the pavement.

Bon appetit.

4.02.2011

Zart 1312 forged railing...FIN!!!







Well, it came down to the 11th hour, but the railing for Zart 1312 was indeed ready to go for Maribeth's first event on April 1. A few loose ends need to be tied up, but we're pretty much a wrap on this one. Though, Maribeth has a few more builds inside to complete. They should be great too!

Thanks go out to Terry Reeves for the milling of the mahogany molding, Nate Fetus for pitching in on the cleaning of the rails and especially April Moore for her undying eagerness to learn and heed constructive criticism. April's dedication to the build really made this job a success. Seriously, I couldn't have done a job this big in such a short period of time without her enormous contribution. You have a solid future in this field, girl!

Thanks, ALWAYS, to Miller's Custom Powder for their extraordinary generosity and hospitality.

Last but not least, thanks to Maribeth Trevillyan for trusting us in getting the job right and installed on time. It was a pleasure working on this one, despite the long, long days and nights and we look forward to knocking out that list of future endeavors.

So...cheers. I'm gonna go sleep for a couple days.

3.27.2011

Zart 1312 forged railing - cont.







Here's some pics from the past week. April and I started installation on Saturday and will continue everyday until it's finished. The mahogany molding needs to be attached to the top channel, but this is how they look inside of Zart.

Thanks Maribeth, Dennis, Daphne, Norm and "DELBERT!"

12.28.2010

Haiku - "Yes...Good Day" - The triumphant return of "JG!"







"Yes, good day, Terry!"



Today was quite the productive and prosperous undertaking. Terry and I managed to demo what was-to-be the original counter substrate yesterday and build all the carcases for new cabinetry today. One 8' carcase and two at 42". The spaces in between will house a 4' reach-in cooler for the sushi chefs. Terry will be trimming all the faces in 3/4" x 1 1/2" red oak tomorrow.

But...and "listen to me now..."

This progress wouldn't have happened today if it weren't for Terry suggesting we "bring JG onto the job." JG is our trusty jobsite Craftsman table saw. Earlier in the year at the London Underground in Ames, we found JG next to an empty Miller Lite keg in the basement one morning. Yeah, he may have had a few pints the night before, but he performed like a champ that day.

Funny, JG is just where you'd expect to find him - bellied up to the bar. Too bad nobody told him the Miller guy has yet to drop off any inventory... GOOD DAY!

11.20.2010

Colombian church pew


As I pointed out in some recent posts, Gabriel Saenz's mother and stepfather both work in the trades in Colombia as a carpenter and steel fabricator, respectively. With my limited knowledge of Catholic furniture, I'm betting these pews are just that with the permanent knee rest on the backside. No padding? Hmm... sadistic indeed. Must be a tough monsignor...

Looks like steel framing with wood seats and backrests. Gabriel says they built 34 pews in total. Nice. Thanks for passing on the fine work from south of the equator...

11.17.2010

Gabriel's platform bed - final fabrication




Well, fabrication is finally complete on Gabriel's platform bed. Today I finished by cutting some notches in the rail cleats with a corresponding rabbet on the end of each bed slat that will fit inside each notch. The slats will then have some thin OSB laid on them to further support the mattress with there being no box spring.

The feet were fastened today as well with some 1" dowel joints. A 3" length was glued in corresponding 1 1/2" deep holes in both the rails and feet. A couple of coats of Varathane and...done.

Thanks so much, Gabriel!! This was a lot of fun to build. I can't wait to see it assembled and shot by a professional photographer like yourself.

Cheers, mate.

9.28.2010

Bombay Bicycle Club - billiard chandelier installation






Earlier today, I finished the fabrication on the Bombay Bicycle Club bike chandeliers. Since the frames were going to stay their original paint jobs, it was going to be a snappy installation. I dropped the frames off with Jeremy this afternoon and came back this evening to find them fully functioning...killer!

A big thanks to everybody who donated the frames. An extra special thanks to Dan Koenig at Ichi Bike for the numerous frames and chains. I'm finishing up a job for Dan this week that will be installed in Ichi Bike's new location in Des Moines' East Village on Walnut right next to Subsect Skateshop. Last, but certainly not least, thanks Gus, Jeremy and Mike for allowing me to do something cool and original for ya'll's new tavern.

Here's to the "cherry on top."

9.25.2010

Punk rocker


Shocker sends a photo of his album shelving his wife commissioned me to build for him for his birthday. Looks like you need to hit a record show or two there fella...

9.23.2010

Hellickson Residence - planters installation






I'm quite pleased with how the planters turned out for Jason and Susan. The biggest challenge with this project was building the boxes in halves while making them seem as seamless as possible. (See previous posts for details.) J.J. at Miller's Custom Powder Coating did a terrific job laying down the "statuary" color. Planters were constructed out of 11 ga. mild steel, 1" sq. tubing and 1.5" sq. tubing - 30" x 30" x 15" tall.

There's a few more projects coming up for the Hellickson Residence...stay tuned.

9.07.2010

Happy Birthday, Shocker


This table was commissioned by Lindsey Schacherer for her husband's birthday.

1" sq. tubing, 5/4 reclaimed barn wood and gloss black powder coat finish on the steel. We estimate the 5' shelving unit is large enough to accommodate almost 600 pieces of vinyl. Get to work, Rob Gordon.

8.17.2010

Glory Bound





Last weekend, I headed down to Kansas City for Mike Vallely's Glory Bound Skatepark Tour. It was epic...

Here's my review of the show coupled with an interview with the "Master of Disaster" Duane Peters (above)...

8.02.2010

Gift - Kathy Svec



Here's a sculpture I was asked to do for Kathy Svec, formally of the Memorial Union at Iowa State University. I was handed a couple of pieces of stone and some wood used around the interior of the Union to construct a retirement gift. The above is what I came up with - the exterior facade of the north side of the Union by the water fountain.

Kathy did marketing, among other things, at the Union for 32 years if I'm correct. I had the pleasure of working in the building with Kathy for more years than a college degree should allow, but if nothing else, she ALWAYS had a smile on her face whenever I saw her. Not everybody was that way...just her.

Much love and longevity to her and husband, Dorian.

6.02.2010

Rural Recycling - Barn Salvage & Reclamation

On a small farm in the middle of B.F.E., Winterset, you'll find (if you're lucky) one of the state's highest concentrations of old barns. Yeah, but these get the line *some assembly required*. Scott Henderson and his wife, Beth, travel around the state disassembling old barns that will either be sold as traditional whole structures, pieced out or built as new structures. Scott's Rural Recycling is about as cool as reusable resourcing can get. There's always something new in stock including the pieces below, some of which are going to become a desk for ReadyMade's deputy editor, Amy Palanjian.

Scott also does landscaping and stone masonry under the name Set In Stone. This is a recently completed structure on their property.


Pine, douglas fir, oak, walnut...


All of these mortise and tenon joints were cut by hand, folks. Hand drills, chisels and a mallet...yeah, think about that for a while. This practicum of carpentry may seem a bit antiquated, but it definitely had soul and personality. Both of which are becoming lost with each passing day...



This is just a small glimpse of all the old timbers at the Henderson compound. Does anybody realize when this stuff is gone, it's gonna be GONE forever. Not this lumber in particular, but all of the old barns. That's the cool thing about building with this stuff - giving new life to material that would have otherwise been burnt to ash. You can't rewrite the stories within these beams, but you can pen another chapter for future generations to enjoy...

Stainless steel island






This stainless steel island top was just installed last week for some friends in Ames. Actually, Sonya was in my brother's class in elementary school - small world, eh? Dr. Sonya M. Stoltze Newstrom and her husband, Ryan, are the brains and brawn behind the championship barbecue team Big T'z Q Cru based out of Ames, IA. Lots of state championships for somebody this young. Quite a promising future if you ask me! Congrats on the Memorial Day win here in Des Moines at Smokin' In The Junction, too.

Hopefully this new addition to their kitchen will help with their prep for competitions to come. Speaking of additions, you'll see Sonya's baby bump - congrats and good luck!!

Island substructure is two laminated pieces of 3/4" particle board. Stainless is 16 ga., 314 alloy. Measures 64" x 37" x 1 1/2". Thanks to Howe's Welding and Metal Fabrication for the bends/breaks on the stainless.

5.26.2010

Kraft Foods/Meredith dinner at Proof Restaurant - DSM, IA





On May 10, earlier this month, Meredith Corporation hosted a party here in Des Moines at Proof Restaurant for Kraft Food's Food & Family magazine. Friend and frequent collaborator, Daniel Hyland, was contracted to design the party's decor. I fabricated a couple of tall square planters, the table chargers and the 30" diameter center piece for the evening's festivities.

Cheers.