Wear them.

Here.

...and here.

Schmitt Table

Cherry tabletop (51" x 32") in mahogany stain with semi-gloss polyurethane finish. Vintage pedestal provided by client in black powder coat finish by Miller's Custom Powder Coating.

Bussanmas Residence - exterior railing

This railing is almost identical to the interior other than the molding on top is 1" x 3" rectangular tubing.

Black powder-coated finish with stainless steel hardware and cabling.

Daniel Hyland Design - end tables

18"x18"x18" 11 ga. steel cube in oil-rubbed bronze powder finish.

12"x12"x18" 1/4" aluminum plate in oil-rubbed bronze powder finish.

Bussanmas Residence - desk leg

This leg was built to resemble the Bussanmas' interior cable railing. 1" x 2" rectangular tube, 1" x 1 1/2" flat bar, 21" x 21" x 1/4" mounting plate.

Better pics to follow once it is attached to its kidney-shaped desktop.

Bussanmas Residence - stainless steel cable railing

3/16" stainless steel cable railing. Custom-built 1/4" mild steel posts and framework. Black powder coat finish by Miller's Custom Powder Coating.

We're VERY proud of this railing job. Thank you Bret and Becky Bussanmas for giving us the chance to build something showing the full potential of our craftsmanship. All the best to you and your family. We hope we've done all we could to make your house a home. Cheers...

Larson Residence - stairs cont.

Here's a mock up of the basement stair stringers for Steven. The set in the foreground will actually be turned 180 degrees as they are shown here and go from the landing to the main floor.

Larson Residence - stairs cont.

Mock up of Steven's stairs from a few days ago.

Larson Residence - stairs

The first of four stringer sets to replace traditional lumber/drywall flights that have been demoed out...

Stelter Co. wall

Here's the completed project for the Stelter Company. Thank you to everyone who helped out on this build. Dan Hunt AIA, Miller's, Tony The Painter, Snyder and especially D. Boone for his many, many hours spent sanding all of those cypress slats. You definitely have some ownership in the benches.

Thank you to everyone at Stelter as well. You all were a pleasure to work with - especially Russ and Mark. True gentlemen.

Cheers,
Boonie

Stelter Co. wall mock-up

"I'm building a wall, a fine wall/Not so much to keep you out, more to keep me in." -Pet Shop Boys "Building A Wall"

Close to being completed. Sheeting today and paint tonight.

Stelter Co. bench completion

Strummer gets the first seating...

Stelter Co. bench mock-up II

12' bench that sidles up against a forthcoming wall we're building...

Stelter Co. bench mock-up

1/2" x 1 1/2" aluminum flat bar. Cypress slats ripped to 1 1/2" x 1 1/2". 10' long. Design by Daniel Hunt - Connect Architecture + Design.

Milled

A lot of cypress for the Stelter Company benches. I can't express how much I want these done.

serious.

like.a.heart.attack.

Aluminum console table mock-up

Console table for Daniel Hyland Design. 1/4" aluminum. 80Lx24Hx12W.

I could see leaving this in just a media-blasted finish...

Four-poster steel bed mock-up

Four-poster bed for Daniel Hyland Design. 2" posts. 2" angle side rails. 1 1/2" sq. tube bracing at head and foot and top perimeter.

New hoodies and shirts

New Factor II Fabrication 2012 Spring Slacker Collection available here. Limited run of hoodies ($14) and tees ($8). Pick them up at the shop for that price, or have them shipped anywhere in the lower 48 for a few bucks more.

Ninja

I'm guessing that mask lasts a week during the summer...

Stark Residence

A few simple column adornments for Doug and Angela Stark's cabin. Thank you, both!

No job is too small..